Gross Profit, Operating Income, and Net Income as a percentage of Revenue

Gross Margin

Operating Margin

Profit Margin

Margins

An operating expense is an expense a business incurs through its normal business operations. Often abbreviated as OPEX.

Research and development

Selling and marketing

General and administrative

Operating Expenses

Year over year growth in Revenue and Operating Expenses.

Revenue Y/Y

OpEx Y/Y

Growth

Shares outstanding refer to a company's stock currently held by all its shareholders, including share blocks held by institutional investors and restricted shares owned by the company's officers and insiders.

Outstanding Shares

Market Cap

Also known as Price/Sales Ratio. Calculated using Average market cap for the quarter / Annualized quarterly revenue.

Revenue Multiple

Velo3D

Velo3D, Inc. develops and manufactures metal laser sintering printing machines for 3D printing. Its products include assure system, flow software, sapphire printer, sapphire XC, and SupportFree process. The company was founded by Benyamin Buller in June 2014 and is headquartered Campbell, CA.

Earnings data Q3 2021

Earnings data Q4 2021

Earnings data Q1 2022

Earnings data Q2 2022

Earnings data Q3 2022

Earnings data Q4 2022

Earnings data Q1 2023

Earnings data Q2 2023

Earnings data Q3 2023

Earnings data Q4 2023

Earnings data Q1 2024

Earnings data Q2 2024

Earnings data Q3 2024

Velo3D reports stellar Q4 performance, eyes growth and efficiency

Velo3D's Q4 2022 earnings call showcased impressive financial performance, strategic focus on growth and profitability, and a commitment to operational excellence.
The company's strong revenue growth, margin expansion targets, and prudent cost management strategies position them well for future success and sustained growth in 2023 and beyond.
While challenges like margin improvement and cost control exist, Velo3D's solid balance sheet, revenue outlook, and market opportunities indicate a promising outlook for investors and stakeholders.

Velo3D doubles revenue in Q1, eyes profitability by year-end

Velo3D's Q1 performance reflects robust revenue growth and progress towards profitability, supported by operational enhancements and strong demand.
While facing challenges such as declining recurring revenue, the company is poised for significant growth opportunities in revenue and margin improvement.
Strategic initiatives and market confidence position Velo3D to achieve profitability by the end of 2023 through revenue expansion and cost optimization.

Velo3D reports strong revenue growth but revises guidance downward

Velo3D's Q2 performance showed revenue growth but faced challenges with bookings delays, leading to revised revenue guidance for FY 2023.
The company's strengths lie in its market leadership, strong customer base, and strategic liquidity enhancement through a successful offering.
Challenges include booking delays, margin improvement needs, and achieving profitability amidst operational losses.
Opportunities exist for Velo3D to leverage its market position, drive revenue growth, improve margins, and enhance profitability through operational efficiency.

Velo3D focuses on cash flow optimization amidst revenue challenges

Velo3D's Q3 2023 earnings call highlighted a shift towards optimizing free cash flow, with revenue growth tempered by operational challenges. The company aims to achieve breakeven in Q2 2024 through expense reduction and realignment strategies for profitability in 2024.

Velo3D faces Q4 challenges but sees growth opportunities in 2024

Velo3D's Q4 2023 was challenging but showed resilience in overcoming obstacles through cost reduction, cash flow improvement, and backlog rebuilding. The company's focus on existing customer relationships, new revenue streams, and strategic financial goals for 2024 positions it for long-term success and growth.

Velo3D reports revenue growth and aims for profitability in 2024

Velo3D's Q1 2024 earnings call highlighted positive performance metrics, including revenue growth and increased bookings. The company aims to achieve cash flow breakeven by year-end and expects over 30% sequential revenue growth in Q2. Challenges include a negative gross margin in Q1, but opportunities lie in expanding customer base and achieving sustainable profitability.

Revenue

Cost of revenue

Gross profit

Operating expenses

SG&A

Other

Operating income

EBITDA

Net income

Earnings per share

Total assets

Current assets

Cash & equivalents

Receivables

Inventory

Non-current assets

Net PPE

Intangibles

Total liabilities

Current liabilities

Short term debt

Income tax payable

Non-current liabilities

Long-term debt

Total equity

Stockholders equity

Minority interest

Total liabilities & equity

Total debt

Net debt

Book value per share

Cash from operations

Funds from operations

Change in working capital

Cash from investing

Capital expenditure

Purchase/sale of investments

Purchase/sale of business

Other sources

Cash from financing

Change in stock

Change in debt

Cash dividends paid

Cash from other sources

Net change in cash

Free cash flow

Velo3D, Inc. operates as a technology company, which engages in developing and manufacturing metal laser sintering printing machines for 3D printing. Its products include assure system, flow software, sapphire printer, sapphire XC, and SupportFree process. The company was founded by Benyamin Buller in June 2014 and is headquartered in Fremont, CA.

Ashtead Group PLC

W.W. Grainger

Easing supply-chain issues and the rise in e-commerce activities will aid the Zacks Industrial Services industry. Companies like Grainger (GWW), Ashtead Group (ASHTY), and Velo3D (VLD) are solid investment options due to their healthy growth prospects.

3 Industrial Services Stocks to Buy in the Flourishing Industry

FORT MYERS, Fla.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced ADDMAN, an additive-focused contract manufacturer and engineering firm, has purchased two Sapphire XC printers. The printers will be installed in ADDMAN's Castheon facility, expanding its existing fleet of Sapphire printers and helping the company meet the demands of its customers in space, aviation, energy, and defense. The printers will also enable ADDMAN to expand its addressable use-cases by lowering production costs of 3D printed parts and providing the capabilities to 3D print parts that are 500% larger in volume compared to the original Sapphire printer.

ADDMAN Purchases Two Velo3D Sapphire XC Printers to Provide Customers With High-volume Production Capabilities

CAMPBELL, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today issued a statement on its relationship with Silicon Valley Bank.

Velo3D Issues Statement on Its Relationship With Silicon Valley Bank

CAMPBELL, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced its 2023 roadshow, the Proof is in the Printing Additive Manufacturing Tour, which will visit eight cities across the U.S. The tour builds on Velo3D's previous roadshow series that brought together more than 400 engineers around the U.S. to learn about how metal additive manufacturing can help them transform their businesses.

Velo3D Announces the 2023 “Proof is in the Printing” Roadshow Tour Across Eight U.S. Cities

Tesla

From electric vehicles to software to 3D printing, these three stocks have room to run.

3 Cathie Wood Stocks That Could Go Parabolic in 2023

Velo3D, Inc. (NYSE:VLD ) Q4 2022 Results Conference Call March 2, 2023 5:00 PM ET Company Participants Bob Okunski - VP, IR Benny Buller - CEO Bill McCombe - CFO Conference Call Participants Brian Drab - William Blair Jim Ricchiuti - Needham and Company Troy Jensen - Lake Street Capital Markets Operator Greetings and welcome to the Velo3D Reports Fourth Quarter and Fiscal Year 2022 Financial Results. At this time, all participants are in a listen-only mode.

Velo3D, Inc. (VLD) Q4 2022 Earnings Call Transcript

Velo3D, Inc. (VLD) delivered earnings and revenue surprises of 27.27% and 12.38%, respectively, for the quarter ended December 2022. Do the numbers hold clues to what lies ahead for the stock?

Velo3D, Inc. (VLD) Reports Q4 Loss, Tops Revenue Estimates

Velo3D Announces Fourth Quarter and Fiscal Year 2022 Financial Results

CAMPBELL, Calif.--(BUSINESS WIRE)--Velo3D releases Flow 5.0 to enhance the level of control over the 3D printing process.

Velo3D Releases Flow 5.0 to Enhance the Level of Control Over the 3D Printing Process

CAMPBELL, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) — a leading additive manufacturing technology company for mission-critical metal parts, announced today that it will release its fourth quarter 2022 financial results after the market close on Thursday, March 2, 2023.

Velo3D to Announce Fourth-Quarter 2022 Results on March 2, 2023

Opendoor

SoundHound AI Inc

Your stocks may be doing great this year, but these three speedsters have more than doubled.

3 Hot Stocks That Have Already Doubled in 2023

Repare Therapeutics

Cathie Wood – the billionaire investor who recently called her flagship fund “the new Nasdaq” has been loading up on shares of the following two small-cap stocks in recent days. Velo3D Inc (NYSE: VLD) The first one that's caught her eye is this Velo3D – a California-based provider of metal 3D printing solutions.

Cathie Wood has been building stakes in two little-known stocks

The famed money manager scooped up shares of a metal 3D printing firm and a clinical-stage oncology treatment company.

Cathie Wood's Ark Invest has loaded up on these 2 small-cap names for the last 7 trading sessions

The iconic growth stock investor keeps adding to an obscure 3D stock. She might be onto something.

Why Has Cathie Wood Bought This Stock for Seven Days in a Row?

DENVER--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced Visser Precision, a contract manufacturer serving major industries from the racetrack to outer space, has purchased and received two Sapphire printers to expand its 3D-printing capabilities for its aerospace customers.

Visser Precision Purchases Two Sapphire Printers From Velo3D to Expand its Additive Manufacturing Capabilities for Aerospace Customers

CAMPBELL, Calif.--( BUSINESS WIRE )--Velo3D, Inc. (NYSE: VLD) — a leading additive manufacturing technology company for mission-critical metal parts, today announced preliminary, unaudited fourth quarter and fiscal year 2022 financial results.

Velo3D Announces Preliminary, Unaudited Fourth Quarter and Fiscal Year 2022 Financial Results

CAMPBELL, Calif.--( BUSINESS WIRE )--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced it has appointed Dr. Robin Stamp as Director of Solutions Engineering to help grow the adoption of Velo3D's metal additive manufacturing technology with new customers and in new industries. In his role, Dr. Stamp will oversee the development of new standards with regulatory agencies, qualification of new metal alloys for use in the Sapphire family of printers, and the collaboration with partners and agencies.

Velo3D Hires Dr. Robin Stamp as Director of Solutions Engineering

CAMPBELL, Calif.--( BUSINESS WIRE )--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, announced today that William McCombe, CFO, will speak at the 25th Annual Needham Growth Conference on January 12, 2023 at 11:00 a.m. Eastern Time / 8:00 a.m. Pacific Time.

Velo3D CFO William McCombe to Present at the 25th Annual Needham Growth Conference

Vacasa

Stocks with really low prices are risky, but it doesn't mean they can't move higher if they clear their hurdles.

Stocking Stuffers: 2 Stocks Trading Under $2

CAMPBELL, Calif.--( BUSINESS WIRE )--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced it has appointed Brad Kreger as Executive Vice President of Operations to support the company's goals in production growth, quality standards, and cost reduction. Kreger brings decades of experience overseeing and rapidly scaling operations in hardware production, including tenures at Thermo Fisher Scientific and its subsidiary Affymetrix, and Fluidigm Corporation. He will have oversight of Velo3D's various manufacturing facilities and their corresponding teams, reporting to Velo3D CEO and Founder Benny Buller.

Velo3D to Transform its Production Operations With the Hiring of Brad Kreger as Executive Vice President of Operations

This 3D printing company's failure to meet Wall Street's third-quarter expectations drove the stock sharply lower last month.

Why Shares of Velo3D Plummeted 49% in November

Velo3D: There are several benefits to manufacturers from additive manufacturing. VLD targets markets that have less competition.

Velo3D: Proprietary PBF Technology Sets It Apart From Competitors

CINCINNATI, Ohio--( BUSINESS WIRE )--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced Vertex Manufacturing (a subsidiary of PrinterPrezz) has ordered two new Sapphire XC printers to complement its existing fleet and meet the demands of its customers. The large-format Sapphire printers will help Vertex offer production capabilities at scale, are calibrated for Inconel 718 and GRCop-42, and will be capable of printing parts 600 mm in diameter and 550 mm in height.

Vertex Manufacturing Orders Two Additional Sapphire XC 3D Printers, Including the First Large-format GRCop-42 System in Velo3D's Contract Manufacturer Network

Velo3D CFO William McCombe to Present at the Bank of America Securities A.I. and Disruptive Technology Conference

Velo3D, Inc. (NYSE:VLD ) Q3 2022 Earnings Conference Call November 8, 2022 5:00 PM ET Company Participants Bob Okunski – Vice President-Investor Relations Benny Buller – Chief Executive Officer Bill McCombe – Chief Financial Officer Conference Call Participants Brian Drab – William Blair Troy Jensen – Lake Street Jim Ricchiuti – Needham and Company Wamsi Mohan – Bank of America Shannon Cross – Credit Suisse Operator Greetings, and welcome to Velo3D Reports Third Quarter 2022 Results. At this time, all participants are in a listen-only mode.

News for Velo3D Stock (VLD)